氮原子在Ni平坦和缺陷表面上的吸附和振动

 构造了氮－镍相互作用的5－参数Morse势，研究了氮原子在Ni（\r\n100），Ni（110）和Ni（111）平坦表面的吸附和振动，获得了氮原子\r\n在三个低指数表面的吸附位、吸附构型、结合能和本征振动等数据，计\r\n算结果与实验结果非常吻合．同时，与Ni（100）表面对比，系统研究\r\n了氮原子在Ni（510）台阶面的吸附和扩散．计算结果表明，氮原子在\r\n台阶下部形成最稳定的吸附态，台阶对下台面上扩散的氮原子形成捕获\r\n势，对上台面上扩散的氮原子形成反射势．     

On-line LC-GC-AED and LC-GC-MS – multidimensional methods for the analysis of PAC in fuels,combustion emissions and atmospheric samples

The composition and concentration of polycyclic aromatic compounds (PAC) in fuels. Theier combustion products and in the atmosphere remains a topic of considerable interest. Despite the wealth of literature on the identification of PAC, speciation at low concentrations remains difficult due to instrument limitation and the complexity of fuel and environmental samples. Consequently on line sample preparation procedures (SPE, SFE, LC, etc.) are becomeing an increasingly important step in the analysis procedure particularly where sample clean-up and fractionation are essential for improving analytical resolution. In this study a normal phase high pressure analytical resolution. In this study a normal phase high pressure liquid chromatography-gas chromatography (LC-GC) system has been developed to provide quantitative analysis of samples, as diverse as coal liquids, petroleum fuels, diesel exhaust particulates, and urban air particulates. Separation and identification of parent and alkylated PAH, hetercycline nitro-and oxy-PAC can be achieved by direct coupling to an atomic emission detector and a bech top mass spectrometer. For both systems the primary LC separation combined with the large sample volume transferred to GC vastly improves detection limits. Furthermore the complimentary nature of the two detectors used enables the positive indentification of many unknowns.     

Speciation of chromium in waste waters by coupled column ion chromatography-inductively coupled plasma mass spectrometry

An application of coupled column ion chromatography (IC)-inductively coupled plasma mass spectrometry (ICP-MS) is presented for speciation of chromium in waste waters. By coupling an anion column with a cation column, both the cationic Cr(III) and anionic Cr(VI) species can be analyzed with detection limits below 0.5 μg/1. The separation of the interfering ions (chloride, chlorate, perchlorate, sulphate, sulphite, sulphide, thiosulphate, carbonate, cyanide and some organic compounds) from the chromium peaks is discussed, and the use of different chromium isotopes for data acquisition is compared. Based on the results, m/z 52 was considered as an ideal isotope for speciation of chromium in waste waters by the coupled column IC-ICP-MS, because it did not suffer from polyatomic interferences and due to the high sensitivity for chromium. The analysis of the waste water samples should be performed as soon as possible after sampling according to the stability tests of the species.     

Solar Photocatalytic Degradation of 4‐Chlorophenol in Kaolinite Catalysts

This research applies semiconductor photocatalysts, which are formed by metal ion exchange on the surface of kaolinite catalyst with cations, to the study of photocatalytic degradation of 4‐chlorophenol. The analysis results of catalyst properties shows that, after sintering at 400 °C, kaolinite catalyst has a particle size of between 10–100 nm indicating the nano level of synthesized catalysts. Under the same condition, kaolinite‐Ag/Zn catalyst works better in degradation efficiency than single kaolinite‐Ag and kaolinite‐Zn catalysts. Kaolinite‐Zn catalyst declines in degradation efficacy after 150 minutes and performs poorer than the other three types of kaolinite catalysts. In the experiments of different amounts of catalysts, when the concentration exceeds 0.1 wt%, utilization of light energy and degradation efficiency will be reduced due to shielding effect. When at different pH values, the higher the pH value, the more OH‐will be released and that is beneficial for reaction with substances and the increase of reaction rate. Finally multivariate analysis proves that there is one determining factor that influences the photocatalytic degradation of 4‐chlorophenol in kaolinite catalysts, named as “the factor with intermediates competition degree,” the one affecting the 4‐CP degradation at different weight percentages that is referred to as the “shielding effect factor.”     

Cu/TiO2-NiO上光促表面催化CO2和H2O合成CH3OH反应规律

采用溶胶-凝胶法制备了n(电子型)-p(空穴型) 复合半导体材料0.5％Cu/TiO2-2.0％NiO (w),利用X射线衍射(XRD)、透射电镜(TEM)、红外光谱(IR)、紫外-可见光漫反射(UV-Vis)、程序升温脱附(TPD)技术对材料结构、吸光性能、化学吸附性能进行了表征,研究了该材料对CO2和H2O合成CH3OH的光促表面催化反应(PSSR)规律.结果表明,所制备材料能够明显促进目的反应,室温条件下即有CH3OH生成.在200 ℃下,由于光-表面-热的协同效应,CO2转化率得以提高,且CH3OH的选择性达到87.5％ .根据实验结果,得出CO2在材料表面的卧式吸附态为CH3OH的前驱物,并对PSSR机理进行了讨论.     

ICP-AES法测定混凝土外加剂中微量氯离子

由于Cl^-过量引起混凝土钢筋锈蚀而过早的破坏，已成为世界性问题。混凝土外加剂中微量Cl^-是一个重要指标，准确测定氯离子的含量直接关系到混凝土配比的确定及浇灌后的质量。部颁及行业标准中是采用电化学滴定法和蒸馏法来测定混凝土外加剂的微量Cl^-[1,2]，电化学滴定法对测定干扰大。本文采用电感耦合等离子体原子发射光谱法间接测定与微量Cl^-定量反应后剩余的Ag^ 含量，从而换算出Cl^-的含量，经回收验证及比较，证明本法简便、灵敏、快速，切实可行。     

Lanthanide induced shifts of aromatic 1,2,3-trimethoxy compounds: Conformational analysis of tetrahydrofurofuran-lignans in solution

Summary The solution conformations of 1,4-diaryl-tetrahydro-1H,3H-furo[3,4-c]furans were determined by means of the LIS technique using a modified LIS-simulation program specially designed for the requirements of the aromatic 1,2,3-trimethoxy arrangement as a bidentate coordination site for the NMR shift reagent. The resulting geometries were confirmed by force field calculations (MM2-87) and compared with X-ray derived structures. Reliable data for the conformations in solution allowed a quantitative estimation of the circular dichroism based on the coupled oscillator model.

---

Lanthanideninduzierte Verschiebungen von aromatischen 1,2,3-Trimethoxy-Verbindungen: Konformationsanalyse von Tetrahydrofurofuran-Lignanen in Lösung

Zusammenfassung Es wurden mittels der LIS-Technik die Konformationen von 1,4-Diaryl-tetrahydro-1H,3H-furo[3,4-c]furanen in Lösung bestimmt. Dazu mußte ein modifiziertes LIS-Simulationsprogramm entworfen werden, das auf die besonderen Verhältnisse der aromatischen 1,2,3-Trimethoxy-Gruppierung eingeht, welche in den untersuchten Verbindungen als zweizähnige Koordinationsstelle für das NMR-Verschiebungsreagens fungiert. Die resultierenden Geometrien wurden mittels Kraftfeldrechnungen (MM2-87) überprüft und soweit vorhanden auch mit Röntgenstrukturdaten verglichen. Für die Lösungskonformationen wurde eine quantitative Abschätzung des Circulardichroismus auf der Basis des Modells für gekoppelte Oszillatoren durchgeführt.

     

Energy transfer rates and impact sensitivities of two classes nitramine explosives molecules

Some explosives are stable molecules with large energy barriers to chemical reaction, and in shock or impact initiation, a sizable amount of phonon energy must be converted to the molecular internal higher vibrations by multiphonon up pumping. To investigate the relationship between impact sensitivities and energy transfer rates, the number of doorway modes of explosive molecules is estimated by a simple theory in which the rate is proportional to the number of normal mode vibrations. We evaluated frequencies of normal mode vibrations of 13 explosive molecules which are CHNO nitramine-contained and have not been analyzed previously. The number of doorway modes in the regions of 200–700 cm⁻¹ was evaluated by the direct counting method. For more clear investigation of the relationship we have classified these 13 nitramine explosive molecules, by the number of nitramine group they contained, into two groups. There are eight molecules that contained one nitramine group and five molecules that contained poly-nitramine groups. It is found that the number of doorway modes shows a linearly correlation to the impact sensitivities derived from drop hammer tests. This result is in agreement with that of several previous works. Besides, it is also noted in our study that in those nitramine explosives molecules with similar molecular structure (similar number nitramine group they contained) and similar molecular weight, the correlation between the sensitivity and the number of doorway modes is higher. We found that the vibrational frequency of ω corresponds to nitro group motions of every molecule is contributed to the number of doorway modes in the regions of 200–700 cm⁻¹.     

Separation of phytosterol oxidation products by combination of different polarity gas chromatography capillary columns

The number of characterized phytosterol oxidation products (POPs) from both ring- and side-chain structures has increased during recent decades, resulting in difficulties in the separation of POPs on different gas chromatography (GC) capillary columns. The main objective of this study was to separate a mixture of 29 purified and characterized oxidation products from sito-, campe- and stigmasterol using GC capillary columns with different polarity. For the first time in the area of POPs analysis, the separation efficiency of the combination of two capillary GC columns with different polarities was investigated. A non-polar 5% phenyl coated (DB5-MS) and a mid-polar 35% phenyl coated (DB35-MS) column was combined with a pressfit connector. The main improvement was enhanced base line separation for many of the analyzed POPs, compared with the separations achieved using the individual columns. However, three pairs of POPs co-eluted: 24-hydroxysitosterol/campesterol-5beta,6beta-epoxide, stigmasterol-5beta,6beta-epoxide/campesterol-5alpha,6alpha-epoxide and stigmasterol-5alpha,6alpha-epoxide/campestanetriol.     

Photocatalysis of sprayed nitrogen-containing Fe2O3–ZnO and WO3–ZnO composite powders in gas-phase acetaldehyde decomposition

Two series of nano-sized N-containing MO_x–ZnO (M: Fe, W) composite powders were synthesized by spray pyrolysis. The nitrogen content was controlled from 500 to 2100 ppm by changing the powder ingredients and spray pyrolysis temperature. Ultraviolet-visible (UV-Vis) spectra indicated that the N-containing MO_x–ZnO powders absorbed not only ultraviolet light (λ<387 nm) like pure ZnO powder, but also part of visible light (λ<650 nm). Acetaldehyde decomposition was used as a probe reaction to evaluate the photocatalysis of these composite powders. The photocatalytic activity of the N-containing ZnO powder was pronouncedly enhanced by the WO₃ addition under both UV and visible-light irradiation. However, that of the N-containing ZnO powder was suppressed by the Fe₂O₃ addition. A model of the semiconductor energy-band structure is proposed to explain the enhancement and suppression of photocatalytic activity.